Lifting a Massive Load-bearing Beam Without a Crane

Connecting The Terrace Pillars Using a Long Beam Made From a Pack of Boards

Installing Rafter Posts Under The Central Roof Beam

Easy Way to Install a Patio Post #diy #carpenter

How to Install a Corner Patio Support Post in a Frame House

How to Fix a Terrace Post to The Foundation Strapping of a Frame House

Preparing The Posts for The Terrace - Cutting Off The Excess With a Makita Saw

Making a Large Beam From a Pack of Boards

DIY Attic Opening in The Ceiling of a Frame House

Why do We Lay This Beam With The Flat Side - Your Versions in The Comments

Installing Lintels Between Floor Joists

Support Beam for Subsequent Installation of The Building System

Installation of Floor Beams in a Frame House

We Mark The Beams and Throw Them Up, in Increments That are Multiples of The Insulation.

Beam for a Large Opening - Assembly from Individual Boards

Aligning The Frame Wall With a String

We Align The Wall With The Level and Fix it With Temporary Braces.

Hammer vs. Nail Gun

How to Fix The Nodes of The Upper Strapping of a Frame House

Knocking Down The Corner of Frame Walls

After Installing The Partition, We Cut Out The Lower Frame Board and Nail The Upper One.

How We Fix Internal Partitions With a Nail Gun

Together We Installed 9 Frame Walls Inside The House.

When You Have an Extra Pair of Hands, You Don't Need a Wall Jack.

A WALL JACK is a Device That Allows You to Lift The Walls of a Frame House Alone.

We Nail The Lower Strapping Beam When Assembling a Frame Wall

Before Raising The Wall, We Attach The Second Layer of The Top Frame Board.

Inserting a Support Post Into The Header of a Large Window Opening

SUPPORT BEAMS Under The Header Are an Important Element in Frame House Construction

We Fix a Massive Header in The Frame of The Wall Where There Will be a Large Window

How to Fix The Wall Frame After Lifting From The Platform

INTERESTING Device for Lifting a Large Wall of a Frame House

How to Lift The Wall of a Frame House With Your Hands So That it Does Not Fall

How to Quickly Cut a Brace with a Circular Saw and Hammer

We Attach The Upper and Lower Trims According to The Previously Drawn Marks

Installation of frame wall posts on the platform.

We Knock Down Corner Posts of The Walls of a Frame House

Correct Assembly of Door and Window Openings During The Construction of a Frame House

We Prepare The Posts for All The Walls - We Use a Circular Saw for This

How to Easily Mark Wall Studs When Building a Frame House

We Arrange The Headers in Their Places According to The Project

Making a Header for a Large Window Opening in 3 Hammers

We Temporarily Knock Down The Upper and Lower Wall Strappings Together Using Nails

Do You Know Why The Upper and Lower Trims are Temporarily Connected?

We Lay Out and Temporarily Nail The Lower Wall Trim

How to Mark The Walls of a Frame House According to The Construction Project

How to Cut an OSB Board Evenly When Installing The Floor of a Frame House

Technology of Laying OSB Boards on Polyurethane Adhesive Foam