23:56
Making A Complex Hollow Carbon Fibre Drone Fuselage
Easy Composites Ltd
4:18
An Easy Way to Stop Carbon Fabric Fraying and Distorting
14:14
Making Precision Split-Moulds for Complex Carbon Fibre Parts
32:28
Making Professional Carbon Fibre Parts Using Resin Infusion
21:27
Forged Carbon Revisited: Mould Design & Strength Optimisation
37:50
Practical CAD Techniques for Composite Pattern/Mould Design
20:24
Carbon Fibre Tubes - Everything You Need to Know
23:52
Complete Process of Copying a Part in Prepreg Carbon Fibre
25:02
Bio Resin Infusion: 16ft Flax Fibre Canoe
24:56
Moulding Hollow Carbon Fibre Parts Using a Low-Melt Metal Mandrel
9:20
How Much Downforce Can Our Hand-Laminated Carbon Wing Take?
22:44
Making High Temp Carbon Fibre Moulds for Prepreg Using Resin Infusion
21:04
Building a Rear Wing with Carbon Fibre and Nomex
28:50
Vacuum Bags: How To Find, Fix, and Avoid Leaks
22:15
Mouldless Carbon Fibre Technique for One-Off and Prototype Components
18:38
How to Use Flax Fibre in Composites; Performance and Processing
17:55
How Strong is Forged Carbon Fibre? Forged Carbon vs Aluminium vs Markforged vs Onyx
21:44
Make Forged Carbon Fibre Parts Using Compression Moulding
14:49
How to Cast a Two-Part Compression Mould for Forged Carbon Fibre
15:43
Carbon Fibre Reinforcement Weights and Weaves Explained
15:21
How to Use Microporous Membrane Products (eg MTI Hose) in Resin Infusion
14:36
Hand Laminating a Carbon Fibre Part Directly into a 3D Printed Mould
8:32
Making a Composite Mould for a Carbon Fibre Part from a 3D Printed Pattern
30:27
In-Depth Guide to Resin Infusion (3m Kevlar Moulding)
15:11
Choosing Composite Reinforcements for Impact Strength; Kevlar, Carbon, Innegra, Diolen
14:19
How to Laminate Large Composite (Fibreglass) Moulds
13:03
How to Make Large Composite (Fibreglass) Patterns by Hand
13:23
Hand Laminate & Vacuum Bag a Simple Carbon Fibre Part (inc. Vacuum Cleaner method!)
14:37
Using Sheet Wax to Create an Offset Mould for a Carbon Fibre Cover Component
10:56
Making Complex Carbon Fibre Tubes Using a Split-Mould
10:13
How to Make a Roll Wrapped Carbon Fibre Tube
39:00
Making a Carbon Fibre Bike Frame – From CAD Design to Downhill Race
17:10
How to Make Prepreg Carbon Fibre Parts (XPREG® XC110)
